Kane Analyser Integration
Pair once. Every reading — CO, CO₂, ratio, flue temp, efficiency — flows over Bluetooth and drops straight onto the CP12. No jotting figures on your wrist, no typos, no repeat visits because the numbers didn’t add up.
Start your free trial → See all features
Official Kane partner
Kane hold their data integrity to an extremely high standard — and only trust a handful of software partners to talk to their analysers. Checker is one of them. Years of close working with the Kane engineering team means the Bluetooth link is stable, the readings are accurate, and the numbers on your CP12 are the numbers off the flue.
You’ve done the tightness test, you’ve run the analyser, and now you’re trying to read a tiny OLED screen upside-down under a boiler while balancing your phone on your knee. One number off and the CP12 fails audit. Every gas engineer in the country has been there.
Checker pairs directly with your Kane flue gas analyser over Bluetooth. Take the readings on the appliance, the app captures them live, and they drop straight onto your CP12 or commissioning cert — already filled in, already correct. Sign it off, email it to the customer, on to the next job.
How the pairing works
Hold the Bluetooth button on the analyser until the icon flashes. Standard Kane pairing — no special dongles, no faff.
Open the job, hit “Pair analyser” and pick your Kane from the list. Checker remembers it for every future job.
Take the readings on the appliance as normal. Every value streams into the app live and drops onto the certificate automatically.
What auto-fills into your certificate
Whatever the Kane reads, Checker records — against the correct appliance, on the correct certificate, with the timestamp and analyser serial number captured for audit.
Why engineers pair it
Manual entry is where CP12s go wrong. A transposed digit on the CO reading is the difference between a passed audit and a warning letter. Bluetooth removes the human bit.
Readings appear on the phone in real time. Watch the ratio settle, capture the moment, move on.
Values populate the correct field on the Landlord Gas Safety Record, commissioning cert or service form — no re-typing.
Testing two boilers and a fire? Each set of readings pins to the right appliance record automatically.
Analyser serial number, model and timestamp captured on every record — exactly what Gas Safe want to see.
Checker remembers your Kane. Every job after the first is a single tap to reconnect.
Bluetooth doesn’t need signal. Cellars, plant rooms, rural jobs — readings still stream, cert still fills in.
Supported analysers
Checker supports every Kane analyser from the 455 upwards. That covers the whole modern Bluetooth range used on UK vans day in, day out:
Pairing eligibility — important
For a reliable Bluetooth pair the analyser must be:
✓ Recently serviced & calibrated — within the current Kane calibration window.
✓ In warranty — only in-warranty machines are guaranteed to pair correctly.
If your analyser won’t pair, contact Kane support with the analyser’s serial number and the latest calibration certificate and they’ll confirm whether it’s eligible.
Analyser sold separately — the Bluetooth integration is included in every Checker plan at no extra cost.
FAQ
Every Kane analyser from the 455 upwards — 455s, 457, 458s, 358 and the KANE-CPA range. Older 455 units with first-generation Bluetooth chips may not connect, but anything 455s and above is covered provided it’s in warranty and recently serviced.
Nine times out of ten it’s an out-of-warranty or overdue-calibration machine. Contact Kane support with the analyser’s serial number and your latest calibration certificate and they’ll confirm whether the unit is eligible to pair. In-warranty, in-calibration machines from the 455s up pair correctly.
No. Bluetooth pairing and reading capture are included in every Checker plan. You just need to bring your own Kane analyser.
CO in ppm, CO₂ %, CO/CO₂ ratio, flue temperature, ambient temperature, O₂ %, combustion efficiency and excess air — plus the analyser’s serial number and the timestamp of the reading for audit.
No. Once your Kane is paired, Checker remembers it. On every job after that it’s a single tap to reconnect.
Yes. Bluetooth is a direct radio link between the analyser and the phone — no signal needed. Readings still stream and the cert still fills in. Once you’re back on signal, everything syncs to the cloud.
Pick the appliance in Checker before you take the readings. Each set of numbers pins to the right boiler on the customer record and the correct section of the certificate.
Free trial, no card needed. Pair your Kane once, capture perfect readings on every gas cert from now on.
Start your free trial →